Adjustment of capping head

Capping machine is composed of motor, reducer, transmission gear, cap locking system, cap feeding system, bottle feeding transmission system, bottle discharging system, bottle feeding tray system, electric cabinet, frame and other components. Through the bottle to the top, the knife wheel rotates but the bottle does not rotate, with an even distribution of 120 °. The three whirlwind knives rotate to roll the cap and seal, generating a certain upward force. The three knives automatically rotate and shrink inward to close, generating a certain force to roll the cap tightly, which is referred to as the hand-held capping machine for short. This machine can roll bottles of different heights by adjusting the height of the cross arm, and it can be completed by changing the capping head when rolling bottles of different specifications.

The adjustment of capping head is an indispensable part in the production process of capping machine, and its adjustment method is as follows:

The capping head is equipped with multiple capping heads, which can be selected according to the size of different bottle caps. Try it with a bottle before official use.

1. If the cover is not tightly rolled, loosen the lock nut of the capping head, screw out the upper capping head in a counterclockwise direction, and then lock the fixing nut.

2. The cap is rolled too tightly, and the bottle cap is peeled. Loosen the lock nut of the upper capping head, screw it in clockwise, and then lock the upper fixing nut.

3. If the lower edge of the bottle cap is not tightened, the eccentricity of the three rolling cutter heads can be appropriately adjusted according to the actual situation. If it is too tight and the bottle is crushed, the eccentricity of the three rolling heads can be appropriately adjusted.